Pico H will not connect to Windows 11 PC. I hold down the BootSel button, plug in the Pico and nothing happens. I do not get a RPI-RP2 device under "This PC, Devices and Drives". It is not the cable or the Pico. The same cable with the same Pico works as expected on a different PC.
A Pico W behaves the same way when trying to enter BootSel mode - no RPI-RP2 device showing. However, whereas the Pico H does not show up on a port in Device Manager (not BootSel mode), the Pico W does show up as a COM port.In Thonny, the Pico H will not connect at all but in Thonny, I can connect and program the Pico W, however, I cannot install MicroPython - it cannot find the Pico W to install.
Again, the same Pico's with the same cable connect to a different PC with no problem.
And, BTW, ESP32 connects to Thonny with no problem
I suspect this is a Windows 11 driver problem, but I hope perhaps someone in this forum has had the same problem and has a solution.
A Pico W behaves the same way when trying to enter BootSel mode - no RPI-RP2 device showing. However, whereas the Pico H does not show up on a port in Device Manager (not BootSel mode), the Pico W does show up as a COM port.In Thonny, the Pico H will not connect at all but in Thonny, I can connect and program the Pico W, however, I cannot install MicroPython - it cannot find the Pico W to install.
Again, the same Pico's with the same cable connect to a different PC with no problem.
And, BTW, ESP32 connects to Thonny with no problem
I suspect this is a Windows 11 driver problem, but I hope perhaps someone in this forum has had the same problem and has a solution.
Statistics: Posted by rdanah — Tue Oct 22, 2024 4:11 pm