Hi, I have a problem with the inputs of a Raspberry Pi Pico 2W. The inputs are configured as Pin.PULL_DOWN. I activate them with 3.3V from pin 37. When I deactivate them, they remain active and only deactivate when I connect them to GND. Can you help me with this? Thanks
I suggest researching RP2350 Erratum E9.
Ref: Appendix E: Errata - https://datasheets.raspberrypi.com/rp23 ... asheet.pdf
Page #1349 in the 16 October 2024 edition of the datasheet.
(But I could be mistaken.)
Statistics: Posted by B.Goode — Sun Jan 26, 2025 6:49 pm