folks,
I've searched until my eyes are bugging out. Tried most of what I've found and nothing has worked so far.
I've Plugged in the USB GPS, a GlobalSat BU-353N.
It's showing up as /dev/ttyUSB0
Loaded gpsd-clients
Edited the gpsd.config file with the /dev/ttyUSB0 as the device
Made the other changes that I suspect MIGHT be the problem but not sure
GPSD_OPTIONS="-n"
USBAUTO="false"
START_DAEMON="true"
GPS_BAUD=4800
The GPS light is showing a lock, it is on a Cord so its about 1 meter away from the Pi, shouldn't be any interference. The GPS Puck works on another Pi 4.
Any idea where to go next?
Thanks,
Greg
NZ6E <-ham radio
I've searched until my eyes are bugging out. Tried most of what I've found and nothing has worked so far.
I've Plugged in the USB GPS, a GlobalSat BU-353N.
It's showing up as /dev/ttyUSB0
Loaded gpsd-clients
Edited the gpsd.config file with the /dev/ttyUSB0 as the device
Made the other changes that I suspect MIGHT be the problem but not sure
GPSD_OPTIONS="-n"
USBAUTO="false"
START_DAEMON="true"
GPS_BAUD=4800
The GPS light is showing a lock, it is on a Cord so its about 1 meter away from the Pi, shouldn't be any interference. The GPS Puck works on another Pi 4.
Any idea where to go next?
Thanks,
Greg
NZ6E <-ham radio
Statistics: Posted by NZ6E — Fri Mar 21, 2025 7:44 pm